| Category | Specification |
|---|---|
| Model | BF 360 Flow |
| Part Number | HVN-CA-BF360-03 |
| Form Factor | Mid Tower |
| Material | SGCC sheet metal, tempered glass, ABS, Nylon, Silicon, Zinc alloy, NdFeB magnets |
| PC Case Dimensions (L x W x H) | 515 x 254 x 522.6 mm |
| Net Weight | 14.79 kg |
| Warranty | 1 year |
| Notice | Warranty support is only available for orders shipped within the United States. Orders via forwarding services are not supported.Please review our full warranty terms for more information. |
| Front I/O | USB 3.2 Gen 2 Type-C x1USB 3.2 Gen 1 Type-A x2Audio Jack x1Power & Reset Button x1 |
| Motherboard Support | E-ATX* / ATX / Micro-ATX / ITX*To install an E-ATX motherboard, the built-in GPU support bracket must be removed. |
| Expansion Slots | 7 |
| Fan Support | Maximum Amount: 6Top: 2 x 180 mm / 2 x 140 mm / 3 x 120 mmFront: 2 x 180 mmLeft: N/ARight: N/ABottom: N/ARear: 1 x 140 / 1 x 120 mm |
| Fan PWM Repeater | Fan Ports: 1 x PWM repeaters, 6 ports totalLocation: 1 x Cable Management TrayFan Connectors: 6 ports per repeater x 4-pin PWM(Connect your primary fan to the white port to control PWM signal. All other ports mirror the white port’s signal.)Fan Rated Voltage: 12VFan Safety Current: Up to 2.6A across 6 portsPower Connector: 1 x SATA PowerPower Safety Current: 1 x SATA connector power input, 12V → 2.6A (max) |
| CPU Tower Cooler Clearance | Height: Up to 195 mm. |
| Liquid Cooling Support | Top: 240 / 280 / 360 mmFront: N/ALeft: N/ARight: N/ABottom: N/AAIO Thickness Support: Up to 60mm |
| Graphics Card Clearance | Length: Up to 410 mmWidth: Up to 195 mm. |
| GPU Support | 1 – 4.5 Slots |
| RAM Clearance | If the radiator & fans thickness is greater than 80 mm: 280 mm – 40 mm / 360 mm – 60 mm |
| Power Supply Support | ATXLength: Up to 200mm (Clearance – 260mm) |
| Storage | Right Mount: 2 Storage Bays: 2 x 3.5” / 4 x 2.5”Cable Management Tray: 1 Storage Bay: 1 x 3.5” / 2 x 2.5”Storage Bays Included: 2 x (2 x 3.5″ / 4 x 2.5″) |
| Dust Filter | Front: 1 (Built-in)Top: 1 (Built-in)Rear Bottom: 1 (Removable) |
| Pre-installed Fans | 2x H18 Fan (Front) – Case Version1x H14 Fan (Rear) – Case Version(The Loopin™ System is available on the Retail Version only. Pre-installed case fans use single-female fan connectors.) |
Gaming PC Cases
HAVN BF 360 Flow Gaming PC Case – White High Airflow ATX Mid Tower
- High-airflow ATX mid-tower with GPU-focused air guide ramp and dual 180mm fans.
- Ultra-quiet operation with premium FDB bearings and vibration isolation.
- Minimalistic stone-textured front panel with SimpliCable routing system for a cleaner build.
| Brand | HAVN |
|---|


























